Copy+ not seeing drive - complains of error

Any other questions about the software?

Copy+ not seeing drive - complains of error

Postby steviejay » Sun Dec 12, 2010 2:51 pm

Here is the log

Version checking...
Current Version = 1.2.0.8
New version = 1.2.0.8
Program_Change_Info:
Essential fixes for transfer to Sky+HD 1TB boxes - Please see the Copy+ forums for details
Download URL = http://www.skycopyplus.co.uk/includes/d ... =pad&so=au
No update required
CDiskDevices Start..
GetFriendlyName=Maxtor 6V250F0 ATA Device
VolumePath=\\?\ide#diskmaxtor_6v250f0__________________________va111680#5&e883af0&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&2EAC235&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&3&FA
This is not a USB device
GetFriendlyName=ST3160215ACE ATA Device
VolumePath=\\?\ide#diskst3160215ace____________________________3.acf___#5&43175b5&0&1.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&2EAC235&0&1
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&3&FA
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: ST3160215ACE ATA Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000190 and error=The operation completed successfully (0)
Drive 0: 160 GB FAT32 LBA Partition
R_LBA lba=0000003f len=00000001
BPB total sectors does not conform with geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=000130f1 len=00000001
Close drive handle 00000190
Enumerate drive 1,1: Maxtor 6V250F0 ATA Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000190 and error=The operation completed successfully (0)
Drive 1: 250 GB Partition ID=07
Close drive handle 00000190

Apparently there's some kind of fix?
steviejay
Newbie
 
Posts: 3
Joined: Sun Dec 12, 2010 2:47 pm

Re: Copy+ not seeing drive - complains of error

Postby steviejay » Sun Dec 12, 2010 2:58 pm

I have downloaded the BPB and MBR fix utilities. I guess the BPB utility is the correct one to use going by the log output?
steviejay
Newbie
 
Posts: 3
Joined: Sun Dec 12, 2010 2:47 pm

Re: Copy+ not seeing drive - complains of error

Postby steviejay » Sun Dec 12, 2010 3:23 pm

steviejay wrote:I have downloaded the BPB and MBR fix utilities. I guess the BPB utility is the correct one to use going by the log output?


Well it corrected the problem, now to image the new drive. 8)
steviejay
Newbie
 
Posts: 3
Joined: Sun Dec 12, 2010 2:47 pm


Return to Copy+ General Support

Who is online

Users browsing this forum: No registered users and 22 guests

cron