Copy+ cannot see source drive

Any other questions about the software?

Copy+ cannot see source drive

Postby tiptonian » Wed Dec 01, 2010 6:43 pm

So far I have removed 320G HDD from Amstrad DRX780 HD box and connected it to SATA port in PC. It shows in the Disk Management tool As Disk 2 - Basic - 298.09GB - Online containing one healthy partition XTV_STR_DSK (I:). I have also connected brand new 1.5T HDD which I initialised and is showing as Disk 1 - Basic - 1397.26GB - Online, and is empty (Unallocated). On running Copy+ (latest ver 1.2.0.8 ) I can select Drive 1 as the destination drive, but disk/drive 2 is not listed under select source drive. Refresh scans all 3 drives currently connected to the PC so it appears it knows the drive exists, but it is not recognised as a Sky disk. :(
tiptonian
Newbie
 
Posts: 10
Joined: Tue Nov 23, 2010 7:16 pm

Re: Copy+ cannot see source drive

Postby pcbbc » Wed Dec 01, 2010 7:42 pm

Pleas post your log file (C:\Program Files\Copy+\Copy+.log) from after an attempt to detect your disk. Please close Copy+ before attempting to take a copy of the log or else it will be empty or incomplete.
Most likely you have a corrupt partition table with the wrong partition type ID. This happens quite a lot...
There is a fix tool in the FAQ section to repair it.
User avatar
pcbbc
Site Admin
 
Posts: 1802
Joined: Wed Aug 22, 2007 2:08 am
Location: London, UK

Re: Copy+ cannot see source drive

Postby tiptonian » Wed Dec 01, 2010 8:37 pm

Thanks for prompt response. Log file contains:

XTV platform type set to 0
Version checking...
Current Version = 1.2.0.8
New version = 1.2.0.8
Program_Change_Info:
Essential fixes for transfer to Sky+HD 1TB boxes - Please see the Copy+ forums for details
Download URL = http://www.skycopyplus.co.uk/includes/d ... =pad&so=au
No update required
CDiskDevices Start..
GetFriendlyName=WDC WD15EVDS-63V9B1
VolumePath=\\?\ide#diskwdc_wd15evds-63v9b1_____________________01.00a01#5&17ef7b8e&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD3200AVVS-63L2B0
VolumePath=\\?\ide#diskwdc_wd3200avvs-63l2b0___________________01.03a01#5&2aa92c33&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&1
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD7500AAKS-00RBA0
VolumePath=\\?\ide#diskwdc_wd7500aaks-00rba0___________________30.04g30#5&17ef7b8e&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: WDC WD7500AAKS-00RBA0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000258 and error=The operation completed successfully (0)
Could not get partiton info drive 0 (The data area passed to a system call is too small (122))
Close drive handle 00000258
Enumerate drive 1,1: WDC WD15EVDS-63V9B1
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000258 and error=The operation completed successfully (0)
Drive 1: 1500 GB Unpartitioned Drive
Close drive handle 00000258
Enumerate drive 2,2: WDC WD3200AVVS-63L2B0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000258 and error=The operation completed successfully (0)
Drive 2: 320 GB FAT32 LBA Partition
R_LBA lba=0000003f len=00000001
BPB total sectors does not conform with geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=0002613b len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000258
CDiskDevices Start..
GetFriendlyName=WDC WD15EVDS-63V9B1
VolumePath=\\?\ide#diskwdc_wd15evds-63v9b1_____________________01.00a01#5&17ef7b8e&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD3200AVVS-63L2B0
VolumePath=\\?\ide#diskwdc_wd3200avvs-63l2b0___________________01.03a01#5&2aa92c33&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&1
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD7500AAKS-00RBA0
VolumePath=\\?\ide#diskwdc_wd7500aaks-00rba0___________________30.04g30#5&17ef7b8e&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: WDC WD7500AAKS-00RBA0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000160 and error=The operation completed successfully (0)
Could not get partiton info drive 0 (The data area passed to a system call is too small (122))
Close drive handle 00000160
Enumerate drive 1,1: WDC WD15EVDS-63V9B1
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000160 and error=The operation completed successfully (0)
Drive 1: 1500 GB Unpartitioned Drive
Close drive handle 00000160
Enumerate drive 2,2: WDC WD3200AVVS-63L2B0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000160 and error=The operation completed successfully (0)
Drive 2: 320 GB FAT32 LBA Partition
R_LBA lba=0000003f len=00000001
BPB total sectors does not conform with geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=0002613b len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000160
tiptonian
Newbie
 
Posts: 10
Joined: Tue Nov 23, 2010 7:16 pm

Re: Copy+ cannot see source drive

Postby pcbbc » Wed Dec 01, 2010 8:41 pm

The boot record and various other things look well messed up.
You could try the BPB repair tool in the FAQ section. No guarantees though.
User avatar
pcbbc
Site Admin
 
Posts: 1802
Joined: Wed Aug 22, 2007 2:08 am
Location: London, UK

Re: Copy+ cannot see source drive

Postby tiptonian » Wed Dec 01, 2010 9:38 pm

Tried the BPB tool without success. Dialog was:
<<
C:\copyplus>fixskybpb 2 -f

Sky BIOS Paramter Block Fixer 1.03
==================================

Opening \\.\PHYSICALDRIVE2...

Read and check MBR...
Partition start 0000003f for 2542e231 sectors.
This appears to be a 320GB FAT32 LBA partition.

Read and check BPB...
BPB total sector count 2542e231 does not conform with geometry.
This means your drive is corrupt and probably appears unformatted in Windows
and unrecognised in Sky+ and/or Copy+.
But let's see if we can fix that...

Read and check for backup BPB at LBA offset+6 (00000045)...
BPB total sector count 2542e231 does not conform with geometry.

Recreating Sky+ BPB from first principles...
Partition total sector count = 2542e231
MBR total sector count = 2542d310
MBR sectors per fat = 00012a0e
First FAT cluster used for video = 0002f1cb (LBA 00bec73b)
Total video clusters = 00031b94
Bad clusters reserved for VFAT = 00000033
Yeay! - This seems to be a valid BPB for a 320GB Sky+ drive!

The BPB now seems to be a bit more valid....
...at least as far as this program can tell.

Checking FAT 1 present at LBA 0000005f...
Sorry, the FAT signature was not found.
>>

Then tried the MBR tool, but just got
<<
C:\copyplus>fixskymbr 2
Fixing MBR on drive 2...
Drive size 320 GB FAT32 LBA Partition
This drive is already partitioned
>>

The new log file is:
<<
XTV platform type set to 0
Version checking...
Current Version = 1.2.0.8
New version = 1.2.0.8
Program_Change_Info:
Essential fixes for transfer to Sky+HD 1TB boxes - Please see the Copy+ forums for details
Download URL = http://www.skycopyplus.co.uk/includes/d ... =pad&so=au
No update required
CDiskDevices Start..
GetFriendlyName=WDC WD15EVDS-63V9B1
VolumePath=\\?\ide#diskwdc_wd15evds-63v9b1_____________________01.00a01#5&17ef7b8e&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD3200AVVS-63L2B0
VolumePath=\\?\ide#diskwdc_wd3200avvs-63l2b0___________________01.03a01#5&2aa92c33&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&1
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD7500AAKS-00RBA0
VolumePath=\\?\ide#diskwdc_wd7500aaks-00rba0___________________30.04g30#5&17ef7b8e&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: WDC WD7500AAKS-00RBA0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000258 and error=The operation completed successfully (0)
Could not get partiton info drive 0 (The data area passed to a system call is too small (122))
Close drive handle 00000258
Enumerate drive 1,1: WDC WD15EVDS-63V9B1
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000258 and error=The operation completed successfully (0)
Drive 1: 1500 GB Unpartitioned Drive
Close drive handle 00000258
Enumerate drive 2,2: WDC WD3200AVVS-63L2B0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000258 and error=The operation completed successfully (0)
Drive 2: 320 GB FAT32 LBA Partition
R_LBA lba=0000003f len=00000001
BPB total sectors does not conform with geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=0002613b len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000258
CDiskDevices Start..
GetFriendlyName=WDC WD15EVDS-63V9B1
VolumePath=\\?\ide#diskwdc_wd15evds-63v9b1_____________________01.00a01#5&17ef7b8e&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD3200AVVS-63L2B0
VolumePath=\\?\ide#diskwdc_wd3200avvs-63l2b0___________________01.03a01#5&2aa92c33&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&1
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
GetFriendlyName=WDC WD7500AAKS-00RBA0
VolumePath=\\?\ide#diskwdc_wd7500aaks-00rba0___________________30.04g30#5&17ef7b8e&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&1C8F7963&0&0
HubID=PCI\VEN_8086&DEV_27C0&SUBSYS_B0021458&REV_01\3&13C0B0C5&0&FA
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: WDC WD7500AAKS-00RBA0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000160 and error=The operation completed successfully (0)
Could not get partiton info drive 0 (The data area passed to a system call is too small (122))
Close drive handle 00000160
Enumerate drive 1,1: WDC WD15EVDS-63V9B1
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000160 and error=The operation completed successfully (0)
Drive 1: 1500 GB Unpartitioned Drive
Close drive handle 00000160
Enumerate drive 2,2: WDC WD3200AVVS-63L2B0
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000160 and error=The operation completed successfully (0)
Drive 2: 320 GB FAT32 LBA Partition
R_LBA lba=0000003f len=00000001
BPB total sectors does not conform with geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=0002613b len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000160
>>


The disk was working fine in the HD box. Should I refit it and see if it still working, maybe try a planner rebuild?
tiptonian
Newbie
 
Posts: 10
Joined: Tue Nov 23, 2010 7:16 pm

Re: Copy+ cannot see source drive

Postby pcbbc » Thu Dec 02, 2010 12:04 am

tiptonian wrote:Checking FAT 1 present at LBA 0000005f...
Sorry, the FAT signature was not found.[/quote[The file allocation table has been corrupted as well...

Then tried the MBR tool, but just got
There is nothing wrong with the MBR.

The disk was working fine in the HD box. Should I refit it and see if it still working, maybe try a planner rebuild?
You could try...
However the Sky box operates on a principle of "carry on regardless".
Copy+ is a little more cautious and doesn't proceed unless everything checks out.
In this case there are quite a few things wrong with the disk, so it is stopping.
User avatar
pcbbc
Site Admin
 
Posts: 1802
Joined: Wed Aug 22, 2007 2:08 am
Location: London, UK

Re: Copy+ cannot see source drive

Postby tiptonian » Fri Dec 03, 2010 4:32 pm

Hi. Now got the disk back in the Sky box and the recordings and planner stuff are still there, which I was a bit worried about. I've tried to run the planner rebuild, but it fails - "housekeeping" message shows for about 3 seconds, then the box just switches off and reboots. Since I understand Planner Rebuild is essentially like chkdsk I'm guessing a planner rebuild failure also points to disk problems. In recent weeks we've also noticed an increase in the number of screen errors when watching recordings and little glitches like frames have been missed. Again could point to disk problems.

Since it appears I cant copy the disk with copy+, looks like we'll have to watch everything or dump it to the DVD/HDD recorder and then I can fit the new "virgin" disk straight into the box without copying stuff to it first.

Thanks for your help though.
tiptonian
Newbie
 
Posts: 10
Joined: Tue Nov 23, 2010 7:16 pm

Re: Copy+ cannot see source drive

Postby pcbbc » Sat Dec 04, 2010 7:46 pm

tiptonian wrote:Hi. Now got the disk back in the Sky box and the recordings and planner stuff are still there, which I was a bit worried about. I've tried to run the planner rebuild, but it fails - "housekeeping" message shows for about 3 seconds, then the box just switches off and reboots.
I don't know what more you were expecting, but that is what planner rebuild usually does? Perfectly normal if you ask me...

Since I understand Planner Rebuild is essentially like chkdsk I'm guessing a planner rebuild failure also points to disk problems. In recent weeks we've also noticed an increase in the number of screen errors when watching recordings and little glitches like frames have been missed. Again could point to disk problems.
I agree. If there aren't errors during live viewing (indicating reception is OK) this tends to point at a failing disk.
Check the disk with the manufacturers tools to be sure.
User avatar
pcbbc
Site Admin
 
Posts: 1802
Joined: Wed Aug 22, 2007 2:08 am
Location: London, UK

Re: Copy+ cannot see source drive

Postby mflammia » Fri Aug 31, 2012 12:49 pm

Hi,

Been having the same problem in that my Sky HD HDD is not being recognised in Copy +.

I've run the FixSkyBPB and it comes back saying 'This does not appear to be a FAT32 Partitioned drive' - yet in disk management (Windows XP) it shows 279.45 GB FAT32 Healthy.

I can even hop onto the disk and look at the files through IE.

It sees my destination drive WD20EARX without a problem.

Have had a peak at using Darwin and this sees the source drive, mounts it and shows all the recordings.

Any ideas what the problem is? I have a Samsung SkyHD box.

Thanks in advance.
mflammia
Newbie
 
Posts: 2
Joined: Fri Aug 31, 2012 12:36 pm

Re: Copy+ cannot see source drive

Postby mflammia » Fri Aug 31, 2012 12:52 pm

Here is a copy of my log file:

XTV platform type set to 0
Version checking...
Current Version = 1.2.0.8
New version = 1.2.0.8
Program_Change_Info:
Essential fixes for transfer to Sky+HD 1TB boxes - Please see the Copy+ forums for details
Download URL = http://www.skycopyplus.co.uk/includes/d ... =pad&so=au
No update required
CDiskDevices Start..
GetFriendlyName=Hitachi HTS541616J9SA00
VolumePath=\\?\ide#diskhitachi_hts541616j9sa00_________________sb4oc7bp#5&338916ab&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&34D3E975&0&0
HubID=PCI\VEN_8086&DEV_2828&SUBSYS_30C0103C&REV_03\3&B1BFB68&0&FA
This is not a USB device
GetFriendlyName=Generic Storage Device USB Device
VolumePath=\\?\usbstor#disk&ven_generic&prod_storage_device&rev_0.00#00000000000006&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_048D&PID_1336\00000000000006
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=ST330082 0SCE USB Device
VolumePath=\\?\usbstor#disk&ven_st330082&prod_0sce&rev_#st3300820s____________9qfbscp1&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
HubID=USB\ROOT_HUB20\4&3064E25D&0
OpenDevice=\\.\USB#ROOT_HUB20#4&3064E25D&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 6 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0112 returned USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=WDC WD20 EARX-00PASB0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd20&prod_earx-00pasb0&rev_#000001d919a8&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\000001D919A8
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
No device connected on port 2 (status=0)
No device connected on port 3 (status=0)
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0110 returned USB\VID_152D&PID_2338\000001D919A8
Found USB 02.00 device with speed 2 at port 4
CDiskDevices End
Enumerate drive 0,0: Hitachi HTS541616J9SA00
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=0000028c and error=The operation completed successfully (0)
Drive 0: 160 GB Partition ID=07
Close drive handle 0000028c
Enumerate drive 1,1: Generic Storage Device USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=0000028c and error=The operation completed successfully (0)
Could not get size of drive 1 (The device is not ready (21))
Close drive handle 0000028c
Enumerate drive 2,2: WDC WD20 EARX-00PASB0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=0000028c and error=The operation completed successfully (0)
Drive 2: 2000 GB Unpartitioned Drive
Close drive handle 0000028c
Enumerate drive 3,3: ST330082 0SCE USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE3
CreateFile returned handle=0000028c and error=The operation completed successfully (0)
Drive 3: 300 GB FAT12 Partition
R_LBA lba=00000040 len=00000001
BPB incorrect drive geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=00023b3c len=00000001
XTV_STR_DSK signature missing
Close drive handle 0000028c
CDiskDevices Start..
GetFriendlyName=Hitachi HTS541616J9SA00
VolumePath=\\?\ide#diskhitachi_hts541616j9sa00_________________sb4oc7bp#5&338916ab&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&34D3E975&0&0
HubID=PCI\VEN_8086&DEV_2828&SUBSYS_30C0103C&REV_03\3&B1BFB68&0&FA
This is not a USB device
GetFriendlyName=Generic Storage Device USB Device
VolumePath=\\?\usbstor#disk&ven_generic&prod_storage_device&rev_0.00#00000000000006&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_048D&PID_1336\00000000000006
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=ST330082 0SCE USB Device
VolumePath=\\?\usbstor#disk&ven_st330082&prod_0sce&rev_#st3300820s____________9qfbscp1&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
HubID=USB\ROOT_HUB20\4&3064E25D&0
OpenDevice=\\.\USB#ROOT_HUB20#4&3064E25D&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 6 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0112 returned USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=WDC WD20 EARX-00PASB0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd20&prod_earx-00pasb0&rev_#000001d919a8&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\000001D919A8
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
No device connected on port 2 (status=0)
No device connected on port 3 (status=0)
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0110 returned USB\VID_152D&PID_2338\000001D919A8
Found USB 02.00 device with speed 2 at port 4
CDiskDevices End
Enumerate drive 0,0: Hitachi HTS541616J9SA00
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000174 and error=The operation completed successfully (0)
Drive 0: 160 GB Partition ID=07
Close drive handle 00000174
Enumerate drive 1,1: Generic Storage Device USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000174 and error=The operation completed successfully (0)
Could not get size of drive 1 (The device is not ready (21))
Close drive handle 00000174
Enumerate drive 2,2: WDC WD20 EARX-00PASB0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000174 and error=The operation completed successfully (0)
Drive 2: 2000 GB Unpartitioned Drive
Close drive handle 00000174
Enumerate drive 3,3: ST330082 0SCE USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE3
CreateFile returned handle=00000174 and error=The operation completed successfully (0)
Drive 3: 300 GB FAT12 Partition
R_LBA lba=00000040 len=00000001
BPB incorrect drive geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=00023b3c len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000174
CDiskDevices Start..
GetFriendlyName=Hitachi HTS541616J9SA00
VolumePath=\\?\ide#diskhitachi_hts541616j9sa00_________________sb4oc7bp#5&338916ab&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&34D3E975&0&0
HubID=PCI\VEN_8086&DEV_2828&SUBSYS_30C0103C&REV_03\3&B1BFB68&0&FA
This is not a USB device
GetFriendlyName=Generic Storage Device USB Device
VolumePath=\\?\usbstor#disk&ven_generic&prod_storage_device&rev_0.00#00000000000006&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_048D&PID_1336\00000000000006
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=ST330082 0SCE USB Device
VolumePath=\\?\usbstor#disk&ven_st330082&prod_0sce&rev_#st3300820s____________9qfbscp1&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
HubID=USB\ROOT_HUB20\4&3064E25D&0
OpenDevice=\\.\USB#ROOT_HUB20#4&3064E25D&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 6 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0112 returned USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=WDC WD20 EARX-00PASB0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd20&prod_earx-00pasb0&rev_#000001d919a8&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\000001D919A8
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
No device connected on port 2 (status=0)
No device connected on port 3 (status=0)
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0110 returned USB\VID_152D&PID_2338\000001D919A8
Found USB 02.00 device with speed 2 at port 4
CDiskDevices End
Enumerate drive 0,0: Hitachi HTS541616J9SA00
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000350 and error=The operation completed successfully (0)
Drive 0: 160 GB Partition ID=07
Close drive handle 00000350
Enumerate drive 1,1: Generic Storage Device USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000350 and error=The operation completed successfully (0)
Could not get size of drive 1 (The device is not ready (21))
Close drive handle 00000350
Enumerate drive 2,2: WDC WD20 EARX-00PASB0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000350 and error=The operation completed successfully (0)
Drive 2: 2000 GB Unpartitioned Drive
Close drive handle 00000350
Enumerate drive 3,3: ST330082 0SCE USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE3
CreateFile returned handle=00000350 and error=The operation completed successfully (0)
Drive 3: 300 GB FAT12 Partition
R_LBA lba=00000040 len=00000001
BPB incorrect drive geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=00023b3c len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000350
CDiskDevices Start..
GetFriendlyName=Hitachi HTS541616J9SA00
VolumePath=\\?\ide#diskhitachi_hts541616j9sa00_________________sb4oc7bp#5&338916ab&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&34D3E975&0&0
HubID=PCI\VEN_8086&DEV_2828&SUBSYS_30C0103C&REV_03\3&B1BFB68&0&FA
This is not a USB device
GetFriendlyName=Generic Storage Device USB Device
VolumePath=\\?\usbstor#disk&ven_generic&prod_storage_device&rev_0.00#00000000000006&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_048D&PID_1336\00000000000006
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=ST330082 0SCE USB Device
VolumePath=\\?\usbstor#disk&ven_st330082&prod_0sce&rev_#st3300820s____________9qfbscp1&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
HubID=USB\ROOT_HUB20\4&3064E25D&0
OpenDevice=\\.\USB#ROOT_HUB20#4&3064E25D&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 6 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0112 returned USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=WDC WD20 EARX-00PASB0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd20&prod_earx-00pasb0&rev_#000001d919a8&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\000001D919A8
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
No device connected on port 2 (status=0)
No device connected on port 3 (status=0)
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0110 returned USB\VID_152D&PID_2338\000001D919A8
Found USB 02.00 device with speed 2 at port 4
CDiskDevices End
Enumerate drive 0,0: Hitachi HTS541616J9SA00
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000280 and error=The operation completed successfully (0)
Drive 0: 160 GB Partition ID=07
Close drive handle 00000280
Enumerate drive 1,1: Generic Storage Device USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000280 and error=The operation completed successfully (0)
Could not get size of drive 1 (The device is not ready (21))
Close drive handle 00000280
Enumerate drive 2,2: WDC WD20 EARX-00PASB0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000280 and error=The operation completed successfully (0)
Drive 2: 2000 GB Unpartitioned Drive
Close drive handle 00000280
Enumerate drive 3,3: ST330082 0SCE USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE3
CreateFile returned handle=00000280 and error=The operation completed successfully (0)
Drive 3: 300 GB FAT12 Partition
R_LBA lba=00000040 len=00000001
BPB incorrect drive geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=00023b3c len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000280
CDiskDevices Start..
GetFriendlyName=Hitachi HTS541616J9SA00
VolumePath=\\?\ide#diskhitachi_hts541616j9sa00_________________sb4oc7bp#5&338916ab&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&34D3E975&0&0
HubID=PCI\VEN_8086&DEV_2828&SUBSYS_30C0103C&REV_03\3&B1BFB68&0&FA
This is not a USB device
GetFriendlyName=Generic Storage Device USB Device
VolumePath=\\?\usbstor#disk&ven_generic&prod_storage_device&rev_0.00#00000000000006&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_048D&PID_1336\00000000000006
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=ST330082 0SCE USB Device
VolumePath=\\?\usbstor#disk&ven_st330082&prod_0sce&rev_#st3300820s____________9qfbscp1&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
HubID=USB\ROOT_HUB20\4&3064E25D&0
OpenDevice=\\.\USB#ROOT_HUB20#4&3064E25D&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 6 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0112 returned USB\VID_04FC&PID_0C05\ST3300820S____________9QFBSCP1
Found USB 02.00 device with speed 2 at port 1
GetFriendlyName=WDC WD20 EARX-00PASB0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd20&prod_earx-00pasb0&rev_#000001d919a8&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\000001D919A8
HubID=USB\VID_1A40&PID_0101\5&17161864&0&6
OpenDevice=\\.\USB#VID_1A40&PID_0101#5&17161864&0&6#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0109 returned USB\VID_048D&PID_1336\00000000000006
No device connected on port 2 (status=0)
No device connected on port 3 (status=0)
FindInstanceIDByKeyName {36FC9E60-C465-11CF-8056-444553540000}\0110 returned USB\VID_152D&PID_2338\000001D919A8
Found USB 02.00 device with speed 2 at port 4
CDiskDevices End
Enumerate drive 0,0: Hitachi HTS541616J9SA00
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000350 and error=The operation completed successfully (0)
Drive 0: 160 GB Partition ID=07
Close drive handle 00000350
Enumerate drive 1,1: Generic Storage Device USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000350 and error=The operation completed successfully (0)
Could not get size of drive 1 (The device is not ready (21))
Close drive handle 00000350
Enu
mflammia
Newbie
 
Posts: 2
Joined: Fri Aug 31, 2012 12:36 pm


Return to Copy+ General Support

Who is online

Users browsing this forum: Bing [Bot] and 3 guests

cron