Issues after NZ Sky HDi software update?
Posted: Fri Jul 09, 2010 3:07 pm
Hi I used Copy+ on my New Zealand SKY HDi Pace box almost a year ago successfully upgrading it to a 1TB Samsung drive. Have been using it without issues. Even recordings came accross fine with your Beta version back then.
However recently at the beginning of July Sky issued some new features to the EPG/ Planner and Guide view. These are detailed here http://www.skytv.co.nz/Default.aspx?tabid=1356
Since my box has been auto upgraded with these features I have notice since then all my scheduled programs have failed to record. The reason code for failure is:
Failed: Out of Space [4]
Now I know there is plenty of space, should be 40% free. I deleted a whole lot of stored shows and tried to schedule some more programs, they all failed.
I can manually record if the box is set to Automatic management of space. I presume it is deleting something I recorded?
Also now the Planner does not show how much Free Space there is left, it used to prior to the software upgrade.
So has this new software somehow reset the HDi box into thinking it has the original drive in it? Any ideas how I can fix this please?
Some details from the System Details screen are:
Manufacturer: Pace
Hardware ver: TDS850NNZ.45.2
Software ver: 84.2.5.5.8.145
Serial:
Smart card Num:
Operating system version: C021017
EPG Software Ver: U_1.5.2.2
Please help
However recently at the beginning of July Sky issued some new features to the EPG/ Planner and Guide view. These are detailed here http://www.skytv.co.nz/Default.aspx?tabid=1356
Since my box has been auto upgraded with these features I have notice since then all my scheduled programs have failed to record. The reason code for failure is:
Failed: Out of Space [4]
Now I know there is plenty of space, should be 40% free. I deleted a whole lot of stored shows and tried to schedule some more programs, they all failed.
I can manually record if the box is set to Automatic management of space. I presume it is deleting something I recorded?
Also now the Planner does not show how much Free Space there is left, it used to prior to the software upgrade.
So has this new software somehow reset the HDi box into thinking it has the original drive in it? Any ideas how I can fix this please?
Some details from the System Details screen are:
Manufacturer: Pace
Hardware ver: TDS850NNZ.45.2
Software ver: 84.2.5.5.8.145
Serial:
Smart card Num:
Operating system version: C021017
EPG Software Ver: U_1.5.2.2
Please help