Sky+HD Disk not seen in Copy+

Any other questions about the software?

Sky+HD Disk not seen in Copy+

Postby bigbadger » Sun Mar 24, 2013 5:38 pm

Hi

Wanted to upgrade my perfectly working Amstrad drx890 from 500gb drive to 1TB to have more recording space. Installed Copy+ on my Win 7 Ultimate PC with two spare SATA connectors. Ran Copy+ as admin(just in case) and it doesn't see either drive. On startup Copy+ checks for upgrade then scans the three drives connected to my PC. However when I try to select a drive to make a copy - no drives listed. Both drives are visible under "Computer" and both appear in Device manager and Disk management as valid drives. Any ideas what I could try and there doesn't seem to be any other options. Doesn't appear to be a backup option so I could at least backup the drive.

Many thanks for any help.
bigbadger
Newbie
 
Posts: 6
Joined: Thu Feb 02, 2012 5:19 pm

Re: Sky+HD Disk not seen in Copy+

Postby bigbadger » Sun Mar 24, 2013 5:48 pm

I have included my log if that helps

XTV platform type set to 0
Version checking...
Current Version = 1.2.0.8
New version = 1.2.0.8
Program_Change_Info:
Essential fixes for transfer to Sky+HD 1TB boxes - Please see the Copy+ forums for details
Download URL = http://www.skycopyplus.co.uk/includes/d ... =pad&so=au
No update required
CDiskDevices Start..
GetFriendlyName=ST350031 2CS SCSI Disk Device
VolumePath=\\?\scsi#disk&ven_st350031&prod_2cs&rev_sc13#5&2d574305&0&010000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCI\VEN_1095&DEV_3114&SUBSYS_71141095&REV_02\4&2E98101C&0&50F0
HubID=PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0
This is not a USB device
GetFriendlyName=ST375033 0AS SCSI Disk Device
VolumePath=\\?\scsi#disk&ven_st375033&prod_0as&rev_sd35#5&2d574305&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCI\VEN_1095&DEV_3114&SUBSYS_71141095&REV_02\4&2E98101C&0&50F0
HubID=PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0
This is not a USB device
GetFriendlyName=WDC WD10 EZRX-00A8LB0 SCSI Disk Device
VolumePath=\\?\scsi#disk&ven_wdc_wd10&prod_ezrx-00a8lb0&rev_01.0#5&2d574305&0&030000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCI\VEN_1095&DEV_3114&SUBSYS_71141095&REV_02\4&2E98101C&0&50F0
HubID=PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: ST375033 0AS SCSI Disk Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=0000017c and error=The operation completed successfully (0)
Drive 0: 750 GB
Close drive handle 0000017c
Enumerate drive 1,1: ST350031 2CS SCSI Disk Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=0000017c and error=The operation completed successfully (0)
Drive 1: 500 GB FAT12 Partition
R_LBA lba=00000040 len=00000001
BPB incorrect drive geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=0003b7ca len=00000001
XTV_STR_DSK signature missing
Close drive handle 0000017c
Enumerate drive 2,2: WDC WD10 EZRX-00A8LB0 SCSI Disk Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=0000017c and error=The operation completed successfully (0)
Drive 2: 1000 GB Partition ID=07
Close drive handle 0000017c
CDiskDevices Start..
GetFriendlyName=ST350031 2CS SCSI Disk Device
VolumePath=\\?\scsi#disk&ven_st350031&prod_2cs&rev_sc13#5&2d574305&0&010000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCI\VEN_1095&DEV_3114&SUBSYS_71141095&REV_02\4&2E98101C&0&50F0
HubID=PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0
This is not a USB device
GetFriendlyName=ST375033 0AS SCSI Disk Device
VolumePath=\\?\scsi#disk&ven_st375033&prod_0as&rev_sd35#5&2d574305&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCI\VEN_1095&DEV_3114&SUBSYS_71141095&REV_02\4&2E98101C&0&50F0
HubID=PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0
This is not a USB device
GetFriendlyName=WDC WD10 EZRX-00A8LB0 SCSI Disk Device
VolumePath=\\?\scsi#disk&ven_wdc_wd10&prod_ezrx-00a8lb0&rev_01.0#5&2d574305&0&030000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCI\VEN_1095&DEV_3114&SUBSYS_71141095&REV_02\4&2E98101C&0&50F0
HubID=PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_C2\3&267A616A&0&F0
This is not a USB device
CDiskDevices End
Enumerate drive 0,0: ST375033 0AS SCSI Disk Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000310 and error=The operation completed successfully (0)
Drive 0: 750 GB
Close drive handle 00000310
Enumerate drive 1,1: ST350031 2CS SCSI Disk Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000310 and error=The operation completed successfully (0)
Drive 1: 500 GB FAT12 Partition
R_LBA lba=00000040 len=00000001
BPB incorrect drive geometry
BPB is invalid - Checking root directory signature...
R_LBA lba=0003b7ca len=00000001
XTV_STR_DSK signature missing
Close drive handle 00000310
Enumerate drive 2,2: WDC WD10 EZRX-00A8LB0 SCSI Disk Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE2
CreateFile returned handle=00000310 and error=The operation completed successfully (0)
Drive 2: 1000 GB Partition ID=07
Close drive handle 00000310
bigbadger
Newbie
 
Posts: 6
Joined: Thu Feb 02, 2012 5:19 pm

Re: Sky+HD Disk not seen in Copy+

Postby seadog » Sun Mar 24, 2013 7:23 pm

Try using ExPVR available from ph-mb<dot>com
seadog
Newbie
 
Posts: 1
Joined: Sun Mar 24, 2013 7:14 pm

Re: Sky+HD Disk not seen in Copy+

Postby simie32 » Fri Apr 12, 2013 7:38 pm

Hi. I had the same issue as this and there is a simple solution. The drive must be formatted and the partition removed so it is an unallocated drive. Copy+ will then see it
simie32
Newbie
 
Posts: 2
Joined: Fri Apr 12, 2013 7:36 pm


Return to Copy+ General Support

Who is online

Users browsing this forum: No registered users and 3 guests

cron