XTFS Installer has stopped working message

Any other questions about the software?

XTFS Installer has stopped working message

Postby Griff500master » Mon Mar 14, 2011 10:37 am

Hi.

Now ready to upgrade to my new 1TB HDD.

I have downloaded Copy+ and also the XTFS Driver installer however when I run the Driver installer I get the following message.

' XTFS Read Only File System Installer Has Stopped Working '

Can someone advise why this might be and if it matters?

i am using Windows 7.

Thanks.
Griff500master
Newbie
 
Posts: 7
Joined: Sun Feb 20, 2011 9:31 am

Re: XTFS Installer has stopped working message

Postby pcbbc » Mon Mar 14, 2011 11:20 am

XTVFS drivers are XP only and will not work with Windows 7.
They are not required and just an extra safety precaution against your drive being modified by other OS components between the time the drive is connected and being scanned by Copy+.
Copy+ will then apply the same protection method to the drive when it is scanned, regardless of OS.

Best practice to turn off Anytime and place box in standby and wait for drive to spin down before powering off box. Then disable AV and any other protection software on your PC before running Copy+. Attaching drives via USB rather than directly is also recommended, as this stops check disk running when the system boots.

Read and understand the Darwin FAQ if you have a HD box.
User avatar
pcbbc
Site Admin
 
Posts: 1802
Joined: Wed Aug 22, 2007 2:08 am
Location: London, UK

Re: XTFS Installer has stopped working message

Postby Griff500master » Mon Mar 14, 2011 12:09 pm

Thanks pcbbc.

So I will need 2 USB drive cassettes one for existing HDD and one for the new HDD?
Griff500master
Newbie
 
Posts: 7
Joined: Sun Feb 20, 2011 9:31 am


Return to Copy+ General Support

Who is online

Users browsing this forum: No registered users and 8 guests

cron