Cannot see source drive

Any other questions about the software?

Cannot see source drive

Postby gyrex » Thu Sep 08, 2011 6:00 am

Hi guys,

Just want to say that copy+ is a fantastic tool and I've used it before but for some reason this time I can't see my Foxtel IQ2 disk as a source disk.

I've also tried downloading FixSkyBPB.zip and FixSkyMBR.zip but I can't open the archives - they are corrupt?

Wondering if anyone could please help me? My log file is below:

Code: Select all
XTV platform type set to 1
Version checking...
Current Version = 1.2.0.8
New version = 1.2.0.8
Program_Change_Info:
Essential fixes for transfer to Sky+HD 1TB boxes - Please see the Copy+ forums for details
Download URL = http://www.skycopyplus.co.uk/includes/download.php?id=56&src=pad&so=au
No update required
CDiskDevices Start..
GetFriendlyName=WDC WD7500BPKT-60PK4T0 ATA Device
VolumePath=\\?\ide#diskwdc_wd7500bpkt-60pk4t0__________________01.01a01#5&f967b44&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&2AD6E8AA&0&0
HubID=PCI\VEN_8086&DEV_2829&SUBSYS_20A717AA&REV_03\3&21436425&0&FA
This is not a USB device
GetFriendlyName=WDC WD32 00AVVS-63L2B0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd32&prod_00avvs-63l2b0&rev_3a01#d57ca6141072&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\D57CA6141072
HubID=USB\ROOT_HUB20\4&212A1552&0
OpenDevice=\\.\USB#ROOT_HUB20#4&212A1552&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36fc9e60-c465-11cf-8056-444553540000}\0020 returned USB\VID_152D&PID_2338\D57CA6141072
Found USB 02.00 device with speed 2 at port 1
CDiskDevices End
Enumerate drive 0,0: WDC WD7500BPKT-60PK4T0 ATA Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000178 and error=The operation completed successfully (0)
Drive 0:  750 GB 
Close drive handle 00000178
Enumerate drive 1,1: WDC WD32 00AVVS-63L2B0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000178 and error=The operation completed successfully (0)
Drive 1:  320 GB  Partition ID=04
Close drive handle 00000178
CDiskDevices Start..
GetFriendlyName=WDC WD7500BPKT-60PK4T0 ATA Device
VolumePath=\\?\ide#diskwdc_wd7500bpkt-60pk4t0__________________01.01a01#5&f967b44&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&2AD6E8AA&0&0
HubID=PCI\VEN_8086&DEV_2829&SUBSYS_20A717AA&REV_03\3&21436425&0&FA
This is not a USB device
GetFriendlyName=WDC WD32 00AVVS-63L2B0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd32&prod_00avvs-63l2b0&rev_3a01#d57ca6141072&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\D57CA6141072
HubID=USB\ROOT_HUB20\4&212A1552&0
OpenDevice=\\.\USB#ROOT_HUB20#4&212A1552&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36fc9e60-c465-11cf-8056-444553540000}\0020 returned USB\VID_152D&PID_2338\D57CA6141072
Found USB 02.00 device with speed 2 at port 1
CDiskDevices End
Enumerate drive 0,0: WDC WD7500BPKT-60PK4T0 ATA Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=0000015c and error=The operation completed successfully (0)
Drive 0:  750 GB 
Close drive handle 0000015c
Enumerate drive 1,1: WDC WD32 00AVVS-63L2B0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=0000015c and error=The operation completed successfully (0)
Drive 1:  320 GB  Partition ID=04
Close drive handle 0000015c
CDiskDevices Start..
GetFriendlyName=WDC WD7500BPKT-60PK4T0 ATA Device
VolumePath=\\?\ide#diskwdc_wd7500bpkt-60pk4t0__________________01.01a01#5&f967b44&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=PCIIDE\IDECHANNEL\4&2AD6E8AA&0&0
HubID=PCI\VEN_8086&DEV_2829&SUBSYS_20A717AA&REV_03\3&21436425&0&FA
This is not a USB device
GetFriendlyName=WDC WD32 00AVVS-63L2B0 USB Device
VolumePath=\\?\usbstor#disk&ven_wdc_wd32&prod_00avvs-63l2b0&rev_3a01#d57ca6141072&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
InstanceID=USB\VID_152D&PID_2338\D57CA6141072
HubID=USB\ROOT_HUB20\4&212A1552&0
OpenDevice=\\.\USB#ROOT_HUB20#4&212A1552&0#{F18A0E88-C30C-11D0-8815-00A0C906BED8}
Hub has 4 nodes
FindInstanceIDByKeyName {36fc9e60-c465-11cf-8056-444553540000}\0020 returned USB\VID_152D&PID_2338\D57CA6141072
Found USB 02.00 device with speed 2 at port 1
CDiskDevices End
Enumerate drive 0,0: WDC WD7500BPKT-60PK4T0 ATA Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE0
CreateFile returned handle=00000384 and error=The operation completed successfully (0)
Drive 0:  750 GB 
Close drive handle 00000384
Enumerate drive 1,1: WDC WD32 00AVVS-63L2B0 USB Device
CreateFile OPEN_EXISTING called \\.\PHYSICALDRIVE1
CreateFile returned handle=00000384 and error=The operation completed successfully (0)
Drive 1:  320 GB  Partition ID=04
Close drive handle 00000384
gyrex
Newbie
 
Posts: 3
Joined: Thu Sep 08, 2011 5:36 am

Re: Cannot see source drive

Postby gyrex » Thu Sep 08, 2011 11:04 pm

I forgot to mention that I'm running Windows 7 x64 Ultimate and I've tried connecting the disk via the motherboard's onboard SATA ports as well as via 2 different SATA USB2 caddies. I set copy+ to windows xp sp3 compatibility mode and require admin privileges.
gyrex
Newbie
 
Posts: 3
Joined: Thu Sep 08, 2011 5:36 am


Return to Copy+ General Support

Who is online

Users browsing this forum: No registered users and 10 guests

cron